Description

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

• LOW: This model is 5/8 INCH (17mm) LOWER than the stock seat.
• STANDARD: Same height with stock seat
• TALL: This is 9/16 inch (15mm) TALLER than the stock seat height

These 
Complete Seats come assembled with an aftermarket pan and ready to ride.

Note: Our low seat will NOT work on the TPI models and 2 stroke fuel injected models.

SPECIAL NOTE:
Per OEM specifications, the seat bolts should be tightened NO MORE than 4 ft/lbs to prevent tightening or stripping. Over tightening can cause a failure. Cross threading can also be an issue and should be avoided. DO NOT use air tools to tighten seat bolts as it can cause them to be stripped.

FITMENT

• KTM 125 SX 2016-2018
• KTM 150 SX 2017
• KTM 150 XC-W 2017-2019
• KTM 250 SX-F 2016-2018
• KTM 250 XC-F 2016-2017
• KTM 250 SX/XC-W/EXC-F 2017-2018
• KTM 250 XC-W TPI 2019
• KTM 300 XC/XC-W 2017-2018
• KTM 300 XC-W TPI 2019
• KTM 350 SX-F 2016-2018
• KTM 350 XC-F 2016-2017
• KTM 350 EXC-F 2017-2019
• KTM 450 SX Factory Edition 2015
• KTM 450 SX-F/XC-F 2016-2017
• KTM 450 EXC-F 2019
• KTM 500 EXC-F 2017-2019

PROPOSITION 65

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65